To add a collaborator to this project you will need to use the Relish gem to add the collaborator via a terminal command. Soon you'll be able to also add collaborators here!
More about adding a collaboratorFlight Committee Calculations
The flight model should generate correct committee calculations
 Scenarios

 Date committee from timeframe
 Segments per trip committee from default
 Cohort committee for a direct flight from origin
 Cohort committee for a direct flight from destination
 Cohort committee for a direct flight from aircraft
 Cohort committee for a direct flight from airline
 Cohort committee for an indirect flight with usable characteristics
 Cohort committee for a direct flight with origin that exists but is not in t100
 Cohort committee for a direct flight with destination that exists but is not in t100
 Cohort committee for a direct flight with aircraft that exists but is not in t100
 Cohort committee for a direct flight with airline that exists but is not in t100
 Cohort committee for a direct flight with origin and destination that do not match
 Cohort committee for a direct flight with origin that exists but is not in t100 and destination in t100
 Cohort committee for a direct flight with origin in t100, destination that exists but is not in t100, and airline that matches origin
 Aircraft class committee from aircraft
 Country committee from origin and destination
 Country committee from origin only
 Country committee for international flight
 Seat class multiplier committee from seat class
 Seat class multiplier committee from default
 Trips committee from default
 Freight share committee from cohort
 Freight share committee from default
 Load factor committee from cohort
 Load factor committee from default
 Seats committee from aircraft with seats
 Seats committee from aircraft missing seats
 Seats committee from seats estimate
 Seats committee from cohort
 Seats committee from aircraft class
 Seats committee from default
 Passengers committee from seats and load factor
 Fuel type committee from default
 Fuel use coefficients committee from aircraft with fuel use coefficients
 Fuel use coefficients committee from aircraft missing fuel use coefficients
 Fuel use coefficients committee from aircraft class
 Fuel use coefficients committee from cohort where all aircraft have fuel use equation
 Fuel use coefficients committee from cohort where some aircraft are missing fuel use equation
 Fuel use coefficients committee from cohort where all aircraft are missing fuel use equation
 Fuel use coefficients committee from default
 Dogleg factor committee from segments per trip
 Route inefficiency factor committee from country
 Route inefficiency factor committee from default
 Route inefficiency factor after country committee has returned nil
 Distance committee from airports
 Distance committee from distance estimate
 Distance committee from distance class
 Distance committee from cohort
 Distance committee from default
 Adjusted distance committee from distance, route inefficiency factor, and dogleg factor
 Adjusted distance per segment committee
 Fuel per segment committee
 Fuel committee
 Aviation multiplier committee from default
 Emission factor committee from default fuel type
 Date committee from timeframe

 Given
 a flight emitter
 And
 a characteristic "timeframe" of "20100715/20100720"
 When
 the "date" committee is calculated
 Then
 the conclusion of the committee should be "20100715"
 Segments per trip committee from default

 Given
 a flight emitter
 When
 the "segments_per_trip" committee is calculated
 Then
 the conclusion of the committee should be "1.67"
 Cohort committee for a direct flight from origin

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "3"
 Cohort committee for a direct flight from destination

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "destination_airport.iata_code" of "WEA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "3"
 Cohort committee for a direct flight from aircraft

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "aircraft.bp_code" of "BPFM1"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "1"
 Cohort committee for a direct flight from airline

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "airline.iata_code" of "DA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "2"
 Cohort committee for an indirect flight with usable characteristics

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "2"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with origin that exists but is not in t100

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "XXX"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with destination that exists but is not in t100

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "destination_airport.iata_code" of "ADA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with aircraft that exists but is not in t100

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "aircraft.bp_code" of "BPXX2"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with airline that exists but is not in t100

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "airline.iata_code" of "XX"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with origin and destination that do not match

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 And
 a characteristic "destination_airport.iata_code" of "WEA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "2"
 Cohort committee for a direct flight with origin that exists but is not in t100 and destination in t100

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "XXX"
 And
 a characteristic "destination_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should be nil
 Cohort committee for a direct flight with origin in t100, destination that exists but is not in t100, and airline that matches origin

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 And
 a characteristic "destination_airport.iata_code" of "XXX"
 And
 a characteristic "airline.iata_code" of "IA"
 When
 the "cohort" committee is calculated
 Then
 the conclusion of the committee should have a record with "count" equal to "3"
 Aircraft class committee from aircraft

 Given
 a flight emitter
 And
 a characteristic "aircraft.bp_code" of "BPFM1"
 When
 the "aircraft_class" committee is calculated
 Then
 the conclusion of the committee should have "code" of "EX"
 Country committee from origin and destination

 Given
 a flight emitter
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 And
 a characteristic "destination_airport.iata_code" of "AIA"
 When
 the "country" committee is calculated
 Then
 the conclusion of the committee should have "iso_3166_code" of "US"
 Country committee from origin only

 Given
 a flight emitter
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 When
 the "country" committee is calculated
 Then
 the conclusion of the committee should be nil
 Country committee for international flight

 Given
 a flight emitter
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 And
 a characteristic "destination_airport.iata_code" of "WEA"
 When
 the "country" committee is calculated
 Then
 the conclusion of the committee should be nil
 Seat class multiplier committee from seat class

 Given
 a flight emitter
 And
 a characteristic "seat_class.name" of "economy"
 When
 the "seat_class_multiplier" committee is calculated
 Then
 the committee should have used quorum "from seat class"
 And
 the conclusion of the committee should be "0.9"
 Seat class multiplier committee from default

 Given
 a flight emitter
 When
 the "seat_class_multiplier" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "1.0"
 Trips committee from default

 Given
 a flight emitter
 When
 the "trips" committee is calculated
 Then
 the conclusion of the committee should be "1.941"

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 And
 the "freight_share" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should be "0.06205"

 Given
 a flight emitter
 When
 the "freight_share" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "0.04313"
 Load factor committee from cohort

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 And
 the "load_factor" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should be "0.81197"
 Load factor committee from default

 Given
 a flight emitter
 When
 the "load_factor" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "0.81385"
 Seats committee from aircraft with seats

 Given
 a flight emitter
 And
 a characteristic "aircraft.bp_code" of "code"
 When
 the "seats" committee is calculated
 Then
 the committee should have used quorum "from aircraft"
 And
 the conclusion of the committee should be "seats"
Examples: code seats BPFM1 125.0 BPBA1 120.0 BPXX1s 130.0  Seats committee from aircraft missing seats

 Given
 a flight emitter
 And
 a characteristic "aircraft.bp_code" of "code"
 When
 the "seats" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "123.0"
Examples: code BPXX2 BPXX3 BPXX4  Seats committee from seats estimate

 Given
 a flight emitter
 And
 a characteristic "seats_estimate" of "100.25"
 When
 the "seats" committee is calculated
 Then
 the committee should have used quorum "from seats estimate"
 And
 the conclusion of the committee should be "100"
 Seats committee from cohort

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 When
 the "cohort" committee is calculated
 And
 the "seats" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should be "122.5"
 Seats committee from aircraft class

 Given
 a flight emitter
 And
 a characteristic "aircraft_class.code" of "EX"
 When
 the "seats" committee is calculated
 Then
 the committee should have used quorum "from aircraft class"
 And
 the conclusion of the committee should be "121.25"
 Seats committee from default

 Given
 a flight emitter
 When
 the "seats" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "123.0"
 Passengers committee from seats and load factor

 Given
 a flight emitter
 And
 a characteristic "seats" of "105"
 And
 a characteristic "load_factor" of "0.9"
 When
 the "passengers" committee is calculated
 Then
 the conclusion of the committee should be "95"
 Fuel type committee from default

 Given
 a flight emitter
 When
 the "fuel_type" committee is calculated
 Then
 the conclusion of the committee should have "name" of "Jet Fuel"
 Fuel use coefficients committee from aircraft with fuel use coefficients

 Given
 a flight emitter
 And
 a characteristic "aircraft.bp_code" of "code"
 When
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from aircraft"
 And
 the conclusion of the committee should have a record with "m3" equal to "m3"
 And
 the conclusion of the committee should have a record with "m2" equal to "m2"
 And
 the conclusion of the committee should have a record with "m1" equal to "m1"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "b"
Examples: code m3 m2 m1 b BPFM1 0 0 1 0 BPBA1 0 0 2 0 BPXX2 0 0 4 0  Fuel use coefficients committee from aircraft missing fuel use coefficients

 Given
 a flight emitter
 And
 a characteristic "aircraft.bp_code" of "code"
 When
 the "aircraft_class" committee is calculated
 And
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from aircraft class"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "4"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
Examples: code BPXX1f BPXX3 BPXX4  Fuel use coefficients committee from aircraft class

 Given
 a flight emitter
 And
 a characteristic "aircraft_class.code" of "EX"
 When
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from aircraft class"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "1.75"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
 Fuel use coefficients committee from cohort where all aircraft have fuel use equation

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 When
 the "cohort" committee is calculated
 And
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "1.5"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
 Fuel use coefficients committee from cohort where some aircraft are missing fuel use equation

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 When
 the "cohort" committee is calculated
 And
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "2.66667"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
 Fuel use coefficients committee from cohort where all aircraft are missing fuel use equation

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "AIA"
 And
 a characteristic "airline.iata_code" of "EA"
 When
 the "cohort" committee is calculated
 And
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "4"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
 Fuel use coefficients committee from default

 Given
 a flight emitter
 When
 the "fuel_use_coefficients" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should have a record with "m3" equal to "0"
 And
 the conclusion of the committee should have a record with "m2" equal to "0"
 And
 the conclusion of the committee should have a record with "m1" equal to "1.4"
 And
 the conclusion of the committee should have a record with "endpoint_fuel" equal to "0"
 Dogleg factor committee from segments per trip

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "2"
 When
 the "dogleg_factor" committee is calculated
 Then
 the conclusion of the committee should be "1.25"
 Route inefficiency factor committee from country

 Given
 a flight emitter
 And
 a characteristic "country.iso_3166_code" of "US"
 When
 the "route_inefficiency_factor" committee is calculated
 Then
 the committee should have used quorum "from country"
 And
 the conclusion of the committee should be "1.1"
 Route inefficiency factor committee from default

 Given
 a flight emitter
 When
 the "route_inefficiency_factor" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "1.1"
 Route inefficiency factor after country committee has returned nil

 Given
 a flight emitter
 When
 the "country" committee is calculated
 And
 the "route_inefficiency_factor" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "1.1"
 Distance committee from airports

 Given
 a flight emitter
 And
 a characteristic "origin_airport.iata_code" of "origin"
 And
 a characteristic "destination_airport.iata_code" of "destination"
 When
 the "distance" committee is calculated
 Then
 the committee should have used quorum "from airports"
 And
 the conclusion of the committee should be "distance"
Examples: origin destination distance ADA AIA 100.0 AIA WEA 1000.0  Distance committee from distance estimate

 Given
 a flight emitter
 And
 a characteristic "distance_estimate" of "185.2"
 When
 the "distance" committee is calculated
 Then
 the committee should have used quorum "from distance estimate"
 And
 the conclusion of the committee should be "100.0"
 Distance committee from distance class

 Given
 a flight emitter
 And
 a characteristic "distance_class.name" of "petite"
 When
 the "distance" committee is calculated
 Then
 the committee should have used quorum "from distance class"
 And
 the conclusion of the committee should be "100.0"
 Distance committee from cohort

 Given
 a flight emitter
 And
 a characteristic "segments_per_trip" of "1"
 And
 a characteristic "origin_airport.iata_code" of "ADA"
 When
 the "cohort" committee is calculated
 And
 the "distance" committee is calculated
 Then
 the committee should have used quorum "from cohort"
 And
 the conclusion of the committee should be "100.0"
 Distance committee from default

 Given
 a flight emitter
 When
 the "distance" committee is calculated
 Then
 the committee should have used quorum "default"
 And
 the conclusion of the committee should be "640.0"
 Adjusted distance committee from distance, route inefficiency factor, and dogleg factor

 Given
 a flight emitter
 And
 a characteristic "distance" of "100"
 And
 a characteristic "route_inefficiency_factor" of "1.1"
 And
 a characteristic "dogleg_factor" of "1.25"
 When
 the "adjusted_distance" committee is calculated
 Then
 the conclusion of the committee should be "137.5"
 Adjusted distance per segment committee

 Given
 a flight emitter
 And
 a characteristic "adjusted_distance" of "100"
 And
 a characteristic "segments_per_trip" of "2"
 When
 the "adjusted_distance_per_segment" committee is calculated
 Then
 the conclusion of the committee should be "50"
 Fuel per segment committee

 Given
 a flight emitter
 And
 a characteristic "adjusted_distance_per_segment" of "100"
 And
 a characteristic "aircraft.bp_code" of "BPBA1"
 When
 the "fuel_use_coefficients" committee is calculated
 And
 the "fuel_per_segment" committee is calculated
 Then
 the conclusion of the committee should be "200"
 Fuel committee

 Given
 a flight emitter
 And
 a characteristic "fuel_per_segment" of "100"
 And
 a characteristic "segments_per_trip" of "2"
 And
 a characteristic "trips" of "2"
 When
 the "fuel" committee is calculated
 Then
 the conclusion of the committee should be "400"
 Aviation multiplier committee from default

 Given
 a flight emitter
 When
 the "aviation_multiplier" committee is calculated
 Then
 the conclusion of the committee should be "2"
 Emission factor committee from default fuel type

 Given
 a flight emitter
 When
 the "fuel_type" committee is calculated
 And
 the "emission_factor" committee is calculated
 Then
 the conclusion of the committee should be "1.0"
Last published over 5 years ago by brighterplanet.